Our next generation of electrostatic speakers with technical innovations has become an ideal speaker.
The models are available in 3 sizes. Customize according to your taste and room concept.
Our products are divided into electrostats for the mid-high range and subwoofers for the bass range. We supply the components in 3 sizes
(M, L, XL) and in different materials (steel, wood, Plexiglas). In this way, we can meet our customers’ individual requirements in terms of size, materials and surfaces.
We offer our electrostats custom made in the size XL:
- in steel on a concrete base
- in wood (variable types of wood) on a wooden base in natural or concrete look
- in Plexiglas (clear, black or white)
In sizes L and M, we do not offer a steel construction, but supply wooden and Plexiglas versions.
The surface size of the electrostats depends on the intended listening rooms of our customers. In principle, all models produce a balanced, full and differentiated sound. Large rooms should be equipped with the large-area electrostats. Smaller rooms can also be transformed into high-quality sound rooms with the L or M models.
The same applies to our XL, L and M subwoofer bass speakers.
The models differ according to the size of the speakers (12 inch, 15 inch or 18 inch) and therefore according to the different volumes of the subwoofer speakers. These elements are supplied by us in concrete and wooden constructions. The differences in sound quality between the speaker dimensions naturally correlate with the size of the room. We recommend the 18 inch speakers only in combination with the XL electrostats. For a normal sized living room, the L and M versions will be sufficient.
In any case, we are happy to advise our customers on site and adapt the desired system acoustically and physically to the individual room.
room. Technically, we offer both active and passive systems.
This decision is made by the customer or in a consultation.
Electrostats
XL
L
M
Model 1 is an electrostatic loudspeaker system that can be optimally operated with the Dipolsub 1 but also with the other Dipolsubs on offer. It consists of an electrostatic panel in a steel frame on a concrete base or in a wooden frame on a wooden base. The electrostatic panel radiator with a size of 120 x 58 cm is characterized by an extremely light 6μm thick membrane.
The basic equipment includes the ESL loudspeaker system with an analog or active crossover.
Model 2 is an electrostatic loudspeaker system that must be operated with the Dipolsub 2.
It consists of an electrostatic panel in a steel frame on a concrete base or in a wooden frame on a wooden base. The electrostatic panel radiator with a size of 119 x 40 cm is characterized by an extremely light 6μm thick membrane. The basic equipment includes the ESL loudspeaker system with an analog crossover.
Model 3 is an electrostatic loudspeaker system that can be combined with a Ripol subwoofer in a Plexiglas enclosure from ModalAkustik. This model is only available in a Plexiglas version.
The electrostats are supplied with DSP Class D amplifiers as standard, which also drive the subwoofer. An analog crossover can also be installed as an option. In this case, the Ripol subwoofer must be supplemented with an amplifier from ModalAkustik. The 120 x 22 cm flat radiator is characterized by an extremely light 6μm thick cone.
- Dimensions:
Concrete: H 160 x W 62 x D 38 cm
Wood: H 153 x W 64 x D 40 cm - Frequency range:
80 – 22.000 Hz +/- 3db - Power handling:
passive 20 – 500 W per channel - Impedance:
4 Ω , 1.0 at 20 kHz.
compatible with 4, 6,
or 8 Ohm amplifiers - Characteristic sound pressure:
86 dB/2.83 v/m - Weight:
Metal-concrete approx. 50 kg
Wood approx. 38 kg - for rooms from 25 square meters
- Operation only with Dipolsub I and II
- All models can be supplied with DSP Class D amplifiers on request.
- Dimensions:
Concrete: H 160 x W 46 x D 38 cm
Wood: H 154 x W44 x D 40 cm - Frequency range:
200 – 22.000 Hz +/- 3db - Power handling:
passive 20 – 500 W per channel - Impedance:
4 Ω , 1.0 at 20 kHz.
compatible with 4, 6,
or 8 Ohm amplifiers - Characteristic sound pressure:
91 dB/2.83 v/m - Weight:
Metal-concrete approx. 40 kg
Wood approx. 32 kg - for rooms from 15 square meters
- Operation only with Dipolsub I and II
- All models can be supplied with DSP Class D amplifiers on request.
- Dimensions:
H 155 x W 34 x D 40 cm - Frequency range:
250 – 22.000 Hz +/- 3db - Power handling:
passive 20 – 400 W per channel - Impedance:
4 Ω , 1.0 at 20 kHz.
compatible with 4, 6,
or 8 Ohm amplifiers - Characteristic sound pressure:
91 dB/2.83 v/m - Weight:
approx. 30 kg - for rooms from 15 square meters
Subwoofer
Dipolsub I 18"
Dipolsub I 15"
Dipolsub II 12"
- Dimensions:
H 58 x W 54 x D 60 cm - Frequency range:
- 15 – 200 Hz +/- 3db
- 2 x 18“ loudspeakers
- Power handling:
loudspeakers 1200 W RMS
Aktive D-Class (DSP) 500W RMS - ( 1000W on request)
- Impedance:
4 Ω. - Characteristic sound pressure:
loudspeakers 91 dB/W/m - Weight:
Concrete: approx. 150 kg
Wood: approx. 70 kg - for rooms from 25 square meters
- Dimensions:
H 50 x W 41 x D 51 cm - Frequency range:
18 – 200 Hz +/- 3db - 2 x 15“ loudspeakers
- Power handling:
loudspeakers 600 W RMS
Aktive D-Class (DSP) 500W RMS - (1000W on request)
- Impedance:
4 Ω. - Characteristic sound pressure:
loudspeakers 89 dB/W/m - Weight:
Wood: approx. 40 kg - for rooms from 15 square meters
- Dimensions:
H 39 x W 36 x D 40 cm
lower cut-off frequency 18HZ at – 8db in the near field - 2 x 12“ louds
- Power handling:
loudspeakers 400 W RMS
2 pcs Aktive D-Class (DSP) 250W RMS contained within the Electrostats! - Impedance:
4 Ω. - Characteristic sound pressure:
loudspeakers 90 dB/W/m - Weight:
Wood: approx. 15 kg - for rooms from 15 square meters
